HTS KIT
High temperature solder kit for on-site cable assembly fabrication
SKU: HTS-KIT
Wilcoxon’s 6Q-style connector fills the need for a higher temperature, more reliable, underwater exposure connector for 2 and 3-pin MIL-style sensor connections. The HTS (high temperature solder) kit is used when sockets must be soldered to the wires.
Each tool kit contains three 2 oz tubes of epoxy, which is enough to assemble a maximum of approximately 75 connectors (connectors and cabling must be ordered separately). One 2-oz tube of epoxy will pot approximately 25 connectors. Keep in mind that the mixer nozzles are disposed of after one use. If 5 connectors are epoxied at the same time, you would need 5 mixer nozzles per tube of epoxy. If you epoxy 25 connectors at the same time, you would need 1 mixer nozzle per tube of epoxy.
- High temperature epoxy – used to ‘dab’ onto spring
- Metal socket insertion tool – installs connector sockets into connector body
- Plastic socket insertion tool
- Crimp tool – crimps backshell to crimp sleeve to hold shield
- Wire stripper – strips the wire conductor insulation to length
- Scissors – use to trim shield braid and fiber strands
- Exacto knife -15 blades, use to score and cut cable jacket
- Plastic knife guard – guards for the Exacto blades
- Epoxy nozzle, EPX – mixing nozzle, mounts on the plunger
- Epoxy plunger 4:1 – holds the two-part epoxy
- Epoxy applicator gun – holds epoxy, pushes plunger to dispense epoxy into backshell
- Carrying case with foam – holds all the components of the kit
| SKU | HTS-KIT |
| Categories | Field installation Connector Kits, Sensor Cables, Sensors |
| Tags |
